Excavator Wet Hire with Operator
Blue Mountains, Penrith & Central West
Excavator Hire with an Experienced Operator
Wet hire means you hire the machine and the operator together. Laser Landscapes & Excavation supplies 1.7, 5 and 13 tonne excavators with one of our own experienced operators, so the work is done properly and you do not have to run the machine yourself.
We wet hire to builders, landscapers, councils and homeowners across the Blue Mountains, Penrith and the Nepean, and the Central West. Our operators are used to sloping blocks, rocky ground and tight access, which is where an experienced hand on the controls saves time and avoids damage.
Every job runs under our ISO 9001, 14001 and 45001 certified management systems.
What Our Wet Hire Covers
Tell us what the job is and we will match the machine and operator to it, from a small backyard dig to a larger earthworks package for a builder or council.
Wet Hire Work We Take On
Typical wet hire jobs include:
- Site cuts and levelling
- Service and drainage trenching
- Footing and pier excavation
- Soil and spoil removal
- Rock hammering and removal
- Earthworks for builders and landscapers
Our Equipment Fleet
Our fleet includes:
- 1.7t, 5t & 13t Excavators (with attachments)
- 2t Tracked Site Dumper
- 3t & 14t Tippers for material transport
- Rock Hammer & Removal Equipment
Why Wet Hire with Laser Landscapes
What Our Clients Say
Wet Hire or Dry Hire?
With dry hire, you hire the machine only and operate it yourself. With wet hire, the machine comes with an operator who does the work for you.
Dry hire can suit someone with operating experience on an open, easy site. On sloping, rocky or tight sites, or close to houses, services and boundaries, wet hire is usually the safer choice and often the quicker one. Here is what you get with wet hire from our team:
An Operator Who Knows the Machine
Our operators run our machines every day and know what each excavator can do on a slope, near a boundary or close to a house.
Levels and Drainage Done Right
Getting levels and falls right at the excavation stage helps prevent water problems later under slabs, paths and retaining walls.
Trenches Dug to Line and Depth
Service and drainage trenches are dug to the right line and depth, so the next trade can get on with the job.
The Right Machine for the Site
From the 1.7 tonne excavator for tight access to the 13 tonne for larger cuts, we bring the machine that suits your site.
Ready for Rock
Blue Mountains and Central West sites often hit rock. With a rock hammer on hand, the dig can keep moving when the ground gets hard.
No Machine to Manage
You do not need to run the machine or carry the risk of operating it yourself. Our operator does the work while you get on with yours.
Book Excavator Wet Hire
Tell us about your site, the work and when you need it, and we will recommend the right machine and send you a quote. Call Andrew on 0435 355 975 or send us a message.
Frequently Asked Questions
Wet hire is when you hire a machine together with an operator. We supply the excavator and one of our experienced operators, and the operator does the digging, levelling or trenching on your site.
Dry hire is the machine only, and you or your own operator run it. Wet hire includes the operator. This page covers our wet hire service, where one of our operators runs the machine for you.
We wet hire 1.7, 5 and 13 tonne excavators with attachments. We also have a 2 tonne tracked site dumper, 3 and 14 tonne tippers for moving material, and a rock hammer for rocky ground. Tell us about the job and we will recommend the right setup.
The cost depends on the machine, how long you need it, the site and how far we travel. We quote each job so you know the cost before work starts. Contact us for a quote.
We work across the Blue Mountains, Penrith and the Nepean, and the Central West, including Lithgow, Bathurst, Orange and Oberon. See all our service areas.
Yes. Our 3 and 14 tonne tippers can move spoil, rock and material on and off site as part of the job. Let us know when you ask for a quote.